Vandy Vape Kylin M AIO Pod Kit 70W
- Brand: Vandy Vape
- Unit: set
- Type: Pod System Vape Kit
- Net Weight: 195(g)
The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.
INTRODUCTION
Product introduction
Known as a real rebuild AIO, the front of Vandy Vape Kylin M AIO Kit is a smooth panel with patterns, and the back is a frosted panel printed with the letters "Kylin". The two types of panels are mixed together, which make it "existential" in the hand. Moderate weight, PCBA waterproof function and sturdy structure, the Kylim M AIO is a well-made equipment without any doubt.
In terms of performance, Kylin M AIO is powered by a single 18650 battery with a maximum output power of 70W and supports Type-C 1.5A quick charging. As for capacity, it is equipped with 2 different types of pods: one is a rebuild pod of 5ml and the other is a pre-build pod of 2.5 ml, which can perfectly meet the different needs of vapers.
The coil part is one of the highlights of Kylin M AIO. The Kylin M AIO has a special build mode and various types of coils with high operability. It supports 3 different types of coils, one is a finished coil for pre-build pod, and the other two are mesh coils or single coils for rebuild pod. To build, you need to insert four stainless steel rods into the bottom of the pod, turning the pod into RDTA.
In general, the Kylin M AIO is a pod system kit with excellent product quality and delicate surface treatment. With different coil types to choose from and a large number of accessories attached, the Kylin M AIO is definitely a vape device with much DIY fun. If you are a build fan and need to carry it around, then Vandy Vape Kylin M AIO is a good device for you.
Parameters
Size: 100.8mm(Length)*46.5mm(Width)*24.5mm(Diameter)
Power range: 5-70W
Battery Type: External Replaceable 18650 Battery (not included)
Capacity: 5mL for Rebuildable, 2.5mL for Pre-Built Coils
Coil: M Coil 0.3ohm (35W – 45W) Single Meshed
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-5.5V
Charging Input Current: 1500mA
Operating Mode: VW/VV/TCSS
Maximum Output Current Protection: <30A
Charging Port: Type-C Port
Protections: Open Circuit/Over-current/10 Seconds Cut-off/Over-temperature/Low-Battery Warning/Short Circuit Protection
Colors: Wormhole, Fantasy forest, Silver moonlight, Polar phantom
Vandy Vape Kylin M AIO Pod Kit 70W comes with
1 x Kylin M AIO Device
1 x Kylin M AIO DIY Pod (5mL)
1 x Kylin M AIO Pod (2.5mL)
1 x Kylin M AIO Coil (0.3ohm)
1 x Kylin M AIO Coil (A1 M – 0.2ohm)
1 x Kylin M AIO Coil (SS316L M – 0.15ohm TC)
1 x Kylin M AIO Coil (Dual M – 0.15ohm)
1 x Kylin M AIO Coil (Ni80 M – 0.15ohm)
1 x Triple Fused Clapton Coil (0.23ohm)
1 x M Wire Rod
1 x Lead Guide
2 x Cotton Laces
5 x Steel Wires
1 x Wire Heating Tool
1 x Accessory Bag
1 x Proper User Guidance
1 x Instruction Manual
1 x QC Type-C USB Cable
SPECIFICATION
Features
• The true rebuildable AIO pod.
• Designed for both DIY(rebuildable) and pre-built coil.
• Up to 5ML juice capacity designed for rebuildable atomizer and 2.5ML for the pre-built coil.
• PCBA water-proof out of the box.
• Power by 18650 Battery
• Up to 70W of output power.
• Single Coil Rebuildable Build Deck
• Resin Drip Tip and Honeycomb air holes
GUARANTEE
3 Months for Battery/ Mod. Atomizer & Accessories are DOA (Dead On Arrival), please contact us within 72 hours of delivery.
ORDERING TIPS
Package
Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.